MCNOs/CdS双效光催化剂的制备及其性能研究

水热合成法制备了不同磁性纳米洋葱碳(MCNOs)负载量(0%、1%、3%、5%)的MCNOs/CdS光催化剂。并通过X射线衍射分析(XRD)、扫描电子显微镜(SEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)、紫外可见光光谱(UV-Vis)、磁滞回线测定仪(VSM)对其进行表征,探究了MCNOs负载比例对催化剂在可见光下降解RhB性能及机理的影响。结果表明,MCNOs能有效提高CdS的光催化效果,复合3%MCNOs后降解率为96%,与纯CdS相比降解率提高了30%,磁性分析表明,其具有良好的顺磁性并能实现催化剂的有效回收。MCNOs/CdS在可见光下催化降解RhB的一级反应动力学直线有较好的拟合度,表明制备的催化剂有较好的催化活性。     

Topical application of zein-silk sericin nanoparticles loaded with curcumin for improved therapy of dermatitis

Atopic dermatitis is characterized by leukocyte migration into the skin dermis and typically driven by excessive chemokine production at the site of inflammation. Conventional topical formulations such as gels, creams, and ointments are insufficient for this treatment because of low penetration of drug molecules into the targeted skin tissues. Herein, using a simple, green, sustainable strategy, we have developed novel primary zein nanoparticles embedded in curcumin (Cur) and coated with silk sericin (ZHSCs) for the topical delivery of Cur to penetrate into the dermis and exercise anti-dermatitis effects on the lesion with minimal side-effects. Transdermal delivery experiments and porcine skin fluorescence imaging indicated that ZHSCs facilitate the penetration of Cur across the epidermis layer of skin to reach deep-seated sites. Notably, ZHSCs = 1:0.25 (zein-to-silk sericin mass ratios of 1:0.25) markedly elevated the skin permeability and cumulative turnover of Cur transferred, which were provided a greater than a 3.8-fold increase relative to free Cur. The special nanoparticles of ZHS = 1:0.25 possessed the deepest localization depth and experience a transition of the particle structure and core-shell separation after penetrating into the dermis of skin. In a cell model of dermatitis induced by tumor necrosis factor α/interferon γ co-stimulation, compared with free Cur, Cur-loaded ZHS nanoparticles down-regulated the generation of inflammatory cytokines and chemokines in keratinocytes through suppression of the nuclear translocation of NF-κBp65 and hence exerted an anti-dermatitis effect. This strategy may provide new avenues and direction for the demanding issues of valid topical delivery systems.     

原位液相透射电子显微镜及其在 纳米粒子表征方面的应用

近年来,基于透射电子显微技术、微纳加工技术和薄膜制造技术的发展,原位液相透射电子显微技术产生,为构建多种纳米级分辨率尺度下的微实验平台,发展新型纳米表征技术和众多领域的相关研究提供了途径.本文首先介绍了应用于原位液相透射电子显微技术的液体腔设计要求,然后介绍了液体腔的发展和典型的制备工艺,最后综述了近年来液体腔透射电子显微镜在纳米粒子成核和生长方面的应用研究,并探讨了该技术前沿发展面临的机遇和挑战.本文将为提高我国先进纳米表征技术和原子精准构筑技术提供相关讨论和支持.     

硫化丁苯橡胶纳观界面耐磨机理及参数影响分析

硫化橡胶因其良好的力学和物理化学性能而被广泛作为摩擦副的基础材料. 本文提出了一种硫化交联算法, 实现了C—C键的硫化互交联和自交联, 构建了硫化丁苯橡胶的分子动力学磨损模型, 从微观摩擦学的角度阐明了硫化交联结构对改善丁苯橡胶磨损性能的机理, 研究了不同界面参数对硫化橡胶微观磨损性能的影响. 结果发现 硫化使丁苯橡胶分子链的界面黏附能力和活动能力更弱, 拉伸和解缠能力更低, 磨损过程中界面累积能量更低, 更不容易脱离橡胶基体, 因此可以表现出更好的摩擦学性能, 更强的抗磨损性能; 随着速度的增大, 硫化橡胶的磨损率降低, 与宏观实验结果一致, 原因是硫化橡胶的原子分布函数和相互作用能随着速度增大而降低, 说明橡胶分子链的黏附能力和活动能力随着速度增加趋弱, 温升更低, 导致较低的磨损率; 压入深度对磨损率的影响规律则呈现相反的结果和趋势.     

Fluorescent core-shell polymer particles containing luminophore dyes: synthesis and optical response to acetone

Monodisperse dye-containing crosslinked particles are promising for application in novel optical chemical sensors due to their intrinsic sensitivity. However, preparation of these particles in aqueous media still remains a challenge, since luminophores inhibit radical processes or else cannot embed into polymer chains because of difference in monomer reactivity ratios. In this work, novel dye-containing monodisperse crosslinked particles were prepared and characterized. In order to obtain dye-containing monodisperse crosslinked particles, we studied seed copolymerization of styrene in the presence of divinylbenzene. The influence of nature and concentration of the used comonomers and co-solvents on shape, size distributions and surface characteristics of the particles formed was investigated. Shapes and diameters of the particles were analyzed by DLS, TEM and SEM. The data of SEM and optical spectroscopy studies demonstrated that the synthesized particles were able to self-assemble into thin-film three-dimensional ordered structures. Finally, the structures under study are promising for development of sensor devices with optical response to acetone.     

驻波声场中单分散细颗粒的相互作用特性

利用外加声场促进悬浮在气相中的细颗粒发生相互作用,进而引起颗粒的碰撞和凝并,使得颗粒平均粒径增大、数目浓度降低,是控制细颗粒排放的重要技术途径.为探究驻波声场中单分散细颗粒的相互作用,建立包含曳力、重力、声尾流效应的颗粒相互作用模型,采用四阶经典龙格-库塔算法和二阶隐式亚当斯插值算法对模型进行求解.将数值模拟得到的颗粒声波夹带速度和相互作用过程与相应的解析解和实验结果进行对比,验证模型的准确性.进而研究颗粒初始条件和直径对相互作用特性的影响.结果表明,初始时刻颗粒中心连线越接近声波波动方向、颗粒位置越接近波腹点,颗粒间的声尾流效应就越强,颗粒发生碰撞所需要的时间就越短.研究还发现,颗粒直径对颗粒相互作用的影响取决于初始时刻颗粒中心连线偏离声波波动方向的程度.当偏离较小时,颗粒直径越大,颗粒发生碰撞所需要的时间越短;当偏离很大时,直径较小的颗粒能够发生碰撞,而直径较大的颗粒则无法发生碰撞.     

Chemical versus Electrochemical Synthesis of Carbon Nano‐onion/Polypyrrole Composites for Supercapacitor Electrodes

The development of high‐surface‐area carbon electrodes with a defined pore size distribution and the incorporation of pseudo‐active materials to optimize the overall capacitance and conductivity without destroying the stability are at present important research areas. Composite electrodes of carbon nano‐onions (CNOs) and polypyrrole (Ppy) were fabricated to improve the specific capacitance of a supercapacitor. The carbon nanostructures were uniformly coated with Ppy by chemical polymerization or by electrochemical potentiostatic deposition to form homogenous composites or bilayers. The materials were characterized by transmission‐ and scanning electron microscopy, differential thermogravimetric analyses, FTIR spectroscopy, piezoelectric microgravimetry, and cyclic voltammetry. The composites show higher mechanical and electrochemical stabilities, with high specific capacitances of up to about 800 F g^?1 for the CNOs/SDS/Ppy composites (chemical synthesis) and about 1300 F g^?1 for the CNOs/Ppy bilayer (electrochemical deposition).     

单晶硅晶格间距的测量技术进展及应用

单晶硅晶格间距是许多重要物理常数测量的基础。本文介绍了硅晶格间距测量技术的发展历程,包括X射线干涉仪直接测量和晶格比较仪间接测量两种方法,以及影响测量结果不确定度的关键因素。得益于晶格间距测量的进展,在纳米尺度,硅晶格间距被国际计量局(BIPM)批准成为新的米定义复现形式。最后介绍了硅晶格在计量学中的应用,以及基于硅晶格实现纳米几何量测量的溯源体系的研究趋势。     

A technical review of face mask wearing in preventing respiratory COVID-19 transmission

Since the outbreak of the COVID-19 pandemic, most countries have recommended their citizens to adopt social distance, hand hygiene, and face mask wearing. However, wearing face masks has not been well adopted by many citizens. While the reasons are complex, there is a general perception that the evidence to support face mask wearing is lacking, especially for the general public in a community setting. Face mask wearing can block or filter airborne virus-carrying particles through the working of colloid and interface science. This paper assesses current knowledge behind the design and functioning of face masks by reviewing the selection of materials, mask specifications, relevant laboratory tests, and respiratory virus transmission trials, with an overview of future development of reusable masks for the general public. This review highlights the effectiveness of face mask wearing in the prevention of COVID-19 infection.     

Obtaining of a PET-CaF2 hybrid multifilament: Non-isothermal crystallization studies

Poly(ethylene terephthalate) (PET) has been mixed with fluorite (CaF₂) particles to obtain micro- and nano-composites aiming to obtain a hybrid multifilament. In first term, the use of two montanic waxes and an amide wax as dispersing agents towards the compatibilization of the inorganic and organic components of the CaF₂/PET composite were considered. To do this, non-isothermal crystallization studies by differential scanning calorimetry have been carried out. Moreover, the influence of the CaF₂ particle size and concentration on the thermal properties of the system have been also studied by this technique. Finally, the extrapolation of the results has materialised as a novel PET/CaF₂ hybrid multifilament. Thermal and mechanical properties and molecular weight of the multifilament have been as well evaluated.